Rust-Oleum Projects
Toy Box
Browse Projects
-
Pop of Colour
-
Welcoming Wreath
-
Estimated Time
1 Hour
-
Challenge Level
Easy
-
Tools & Supplies:
-
Wooden Toy Box New Or Used
-
Drop Cloth
-
Lint-Free Cloth
-
Sandpaper
-
Easily transform and customise your child’s toy box with a pop of colour with Rust-Oleum® Painter’s Touch+ Purple Spray Paint!
STEPS
1. PREPARE: Always work in a well-ventilated area. Cover the ground and any nearby items with a drop cloth to protect from spray mist. Make sure surface is clean from dirt and dust. Lightly sand all surfaces. Wipe clean with a damp lint-free cloth, removing all dust and let dry. Priming is especially recommended for bare wood, use Painter’s Touch+ Primer for superior adhesion.
2. PAINT: Shake can for 1 minute after the mixing ball begins to rattle. Hold the can 25-40cm from the surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results, while spraying, keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
3. FINISH: Allow the toy box to fully dry for 24 hours before handling.