Rust-Oleum Projects
Coastal Cabinet
Browse Projects
-
Estimated Time
1 Hour
-
Challenge Level
Easy
-
Tools & Supplies:
-
Drop Cloth
-
Lint-Free Cloth
-
Sandpaper
-
Painter's Tape
-
This little piece adds beauty and storage to any room. Rust-Oleum® Painter’s Touch+ spray paint helps you create a personal piece in no time!
STEPS
1. PREPARE: Always work in a well-ventilated area. Cover the ground and any nearby items with a drop cloth to protect from spray mist. Mask off or remove all glass. Lightly sand all the surfaces. Wipe clean with lint-free cloth, removing all dust. Priming is especially recommended for bare wood, use Painter’s Touch+ Primer for superior adhesion.
2. PAINT: Shake can for 1 minute after the mixing ball begins to rattle. Hold the can 25-40cm from the surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results, while spraying, keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
3. FINISH: Allow the cabinet to fully dry for 24 hours before handling. Replace doors and add stylish hardware to complete your update!