Rust-Oleum Projects
Chic End Table
Browse Projects
-
Candleholder
-
Coastal Cabinet
-
Estimated Time
1 Hour
-
Challenge Level
Easy
-
Tools & Supplies:
-
Wooden End Table
-
Drop Cloth
-
Lint-Free Cloth
-
Sandpaper
-
Add a touch of elegance to your space with an end table painted in Rust-Oleum® Painter’s Touch+ Ivory Tusk!
STEPS
1. PREPARE: Always work in a well-ventilated area. Cover the ground and any nearby items with a drop cloth to protect from spray mist. Make sure surface is clean from dirt and dust. Lightly sand all surfaces. Wipe clean with a damp lint-free cloth, removing all dust and let dry. Priming is especially recommended for bare wood, use Painter’s Touch+ Primer for superior adhesion.
2. PAINT: Shake can for 1 minute after the mixing ball begins to rattle. Hold the can 25-40cm from the surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results, while spraying, keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
3. FINISH: Allow the end table to fully dry for 24 hours before handling.