Rust-Oleum Projects
Accent Chair
Browse Projects
-
Estimated Time
1 Hour
-
Challenge Level
Easy
-
Tools & Supplies:
-
Chair
-
Drop Cloth
-
Lint-Free Cloth
-
Sandpaper
-
Give your outdated chair a fresh new look with a coat of Rust-Oleum® Painter’s Touch+ Orange. This vibrant colour turns an ordinary chair into an energetic statement piece.
STEPS
1. PREPARE: Always work in a well-ventilated area. Cover the ground and any nearby items with a drop cloth to protect from spray mist. Lightly sand the wooden surface of the chair to rough it up. Wipe clean with a damp lint-free cloth and let dry. Priming is specially recommended for bare wood, use Painter’s Touch+ primer for superior adhesion.
2. PAINT: Shake can for 1 minute after the mixing ball begins to rattle. Hold the can 25-40cm from the surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results, while spraying, keep the can the same distance from the surface and keep the can in motion. Apply several light coats a few minutes apart.
3. FINISH: Allow the chair to fully dry for 24 hours before handling.